TPS65263 Step-Down Converter

Product Highlights > TPS65263 Step-Down Converter

            TPS65263 Step-Down Converter
                    Texas Instruments' 4.5 to 18 V input voltage, 3/2/2 A output current step-down converter with I²C controlled DVS
    

Image of Texas Instruments' TPS65263 Step-Down Converter Texas Instruments' TPS65263 incorporates triple synchronous buck converters with 4.5 to 18 V wide input voltage range that encompassed most intermediate bus voltage operating off 5, 9, 12, or 15 V power bus or battery. The converter, with constant frequency peak current mode, is designed to simplify its application while giving designers options to optimize the system according to targeted applications. The device operates in 600 kHz with 180° out-of-phase between buck1 and buck2, buck3 (buck2 and buck3 run in phase).

The initial startup voltage of each buck can be set with external feedback resistors. The output voltage of each buck can be dynamically scaled from 0.68 to 1.95 V in 10 mV step with I²C controlled 7 bits VID. The VID voltage transition slew rate is programmable with 3-bits control through I²C bus to optimize overshoot/undershoot during VID voltage transition.

Features
Operating input voltage range 4.5 to 18 V continuous output current 3/2/2 A I²C controlled 7 bits VID programmable output voltage from 0.68 to 1.95 V with 10 mV voltage step for each buck I²C controlled VID voltage transition slew rate I²C read back power good status, overcurrent warning for each buck I²C read back die temperature warning	I²C compatible interface with standard mode (100 kHz) and fast mode (400 kHz) Feedback reference voltage 0.6 V ±1% Fixed 600 kHz frequency Dedicated enable and soft start pins for each buck Thermal overloading protection